ASTM A500 Hot-Dip Galvanized Structural Hollow Sections for Construction Grade Applications
Λεπτομέρειες προϊόντος
| Όνομα προϊόντος: | Δομικές κοίλες τομές με επίστρωση ψευδαργύρου | Υλικό: | Q195, Q215, Q235, Q355, ASTM A500, ASTM A36 |
|---|---|---|---|
| Το τέλος τελειώνει: | Απλό άκρο, λοξότμητο άκρο ή όπως απαιτείται | Επεξεργασία Επιφανειών: | Γαλβανισμένο εν θερμώ / Ηλεκτρογαλβανισμένο |
| Μέθοδος κατασκευής: | Σχηματισμένο σε ρολό & Συγκόλληση υψηλής συχνότητας | Επικάλυψη ψευδαργύρου: | 40 g/m² – 275 g/m² |
| Πρόσθετες υπηρεσίες: | Κοπή, διάτρηση, διάτρηση, συγκόλληση | Σχήμα: | τετράγωνο & ορθογώνιο |
| Επισημαίνω |
ASTM A500 galvanized steel pipes,zinc-coated structural hollow sections,galvanized steel pipes for construction |
||
Περιγραφή προϊόντος
Galvanized Square Tubes and Rectangular Hollow Sections (RHS/SHS) are high-strength structural steel products designed to deliver superior corrosion resistance and long-term durability in demanding environments. Manufactured from premium carbon steel and protected with a zinc coating through hot-dip galvanizing or pre-galvanizing processes, these tubes provide an ideal balance between strength, service life, and cost efficiency.
Compared with ordinary black steel tubes, galvanized hollow sections require less maintenance and offer significantly longer protection against rust, making them suitable for both indoor and outdoor applications.
These products are widely used in steel structures, commercial buildings, photovoltaic mounting systems, transportation infrastructure, agricultural facilities, and industrial fabrication projects.
Structural steel is often exposed to challenging environmental conditions such as:
- Rain and humidity
- Industrial pollution
- Coastal salt spray
- Temperature fluctuations
- Chemical exposure
Without adequate surface protection, steel tubing can corrode rapidly, resulting in reduced structural performance, increased maintenance costs, and shortened project life cycles.
As modern construction projects demand longer service life and lower maintenance requirements, traditional untreated steel tubing is no longer sufficient for many applications.
Galvanized square and rectangular tubes solve these challenges through a protective zinc coating that shields the steel substrate from corrosion.
- Outstanding corrosion resistance
- Extended service life
- Reduced maintenance costs
- High structural strength
- Excellent weather resistance
- Easy fabrication and installation
- Cost-effective long-term investment
The zinc layer not only acts as a physical barrier but also provides sacrificial protection, helping prevent rust even if minor surface damage occurs.
| Parameter | Details |
|---|---|
| Material | Q195, Q235B, Q355B (or equivalent) |
| Size range | 20x20mm, 25x25mm, 30x30mm, 40x40mm, 50x50mm, 60x60mm, 80x80mm, 100x100mm, 150x150mm, 200x200mm |
| Wall thickness | 1.0mm – 5.0mm (custom available) |
| Length | 6m, 5.8m, or customized (max 12m) |
| Zinc coating thickness | 45µm – 90µm (as per ASTM A123 / EN ISO 1461) |
| Standard | ASTM A500, EN 10219, GB/T 6728 |
| Surface treatment | Hot dip galvanized, smooth and bright |
| Tolerance | According to international standard |
- Hot-Dip Galvanized (HDG)
- Pre-Galvanized (GI)
- Custom Zinc Coating Requirements
- Steel building frames
- Roof support systems
- Warehouse structures
- Commercial buildings
- Perimeter fencing
- Security barriers
- Gate frames
- Guardrail systems
- Solar panel support structures
- Ground-mounted PV systems
- Renewable energy facilities
- Machine frames
- Equipment supports
- Production line structures
- Bridges and walkways
- Airport projects
- Municipal facilities
- Transportation engineering
Galvanized steel tubes are protected through a two-stage corrosion defense mechanism.
The zinc coating forms a protective shield that prevents moisture, oxygen, and corrosive substances from reaching the steel surface.
When the coating is scratched or damaged, zinc corrodes before steel due to its electrochemical properties. This sacrificial protection helps maintain the integrity of the underlying metal and significantly extends service life.
This dual-protection system is the primary reason galvanized tubing outperforms ordinary carbon steel in outdoor environments.
Selecting the correct galvanized hollow section depends on project requirements.
Recommended Size:
- 20*20 mm to 80*80 mm
- Thickness: 1.0–3.0 mm
Suitable For:
- Fencing
- Greenhouses
- Decorative structures
Recommended Size:
- 100*100 mm to 200*200 mm
- Thickness: 3.0–8.0 mm
Suitable For:
- Warehouses
- Workshops
- Commercial buildings
Recommended Size:
- 250*250 mm and above
- Thickness: 8.0–16.0 mm
Suitable For:
- Industrial plants
- Infrastructure projects
- Large steel structures
- Environmental conditions
- Load-bearing requirements
- Zinc coating thickness
- Service life expectations
- Budget considerations
Τα κυριότερα σημεία του προϊόντος
ASTM A500 Zinc-Coated Structural Hollow Sections For Construction, Solar And Infrastructure Projects Product Description Galvanized Square Tubes and Rectangular Hollow Sections (RHS/SHS) are high-strength structural steel products designed to deliver superior corrosion resistance and long-term ...
Ηλεκτρολυτική τροχιά από κασσίτερο για συσκευασία 2.8g/M 5.6g/M Επιλογές επίστρωσης SPTE TFS
Electrolytic Tin Plate Coil For Packaging 2.8g/M 5.6g/M Coating Options SPTE TFS Electrolytic Tin Plate Coil for Packaging - 2.8/2.8 & 5.6/5.6g/m Coating Options SPTE TFS Electrolytic Tin Plate (ETP) represents the industry standard for creating secure, long-lasting metal packaging. This material consists of a cold-rolled steel substrate electrolytically coated with a pure tin layer, forming an exceptional barrier that is both robust and adaptable. Engineered specifically for
Λιθογραφικά Τυπωμένα Ηλεκτρολυτικά Φύλλα Λευκοσιδήρου Για Συσκευασία Τσαγιού Premium 660mm 929mm
Lithographic Printed Electrolytic Tin Plate Sheets For Premium Tea Packaging 660mm 929mm Product Description Electrolytic Tin Plate (ETP) represents a premium packaging solution engineered for superior corrosion resistance and durability in demanding applications. These specialized tinplate sheets feature precise thickness options of 0.35mm, 0.38mm, and 0.45mm, providing manufacturers with versatile solutions for various packaging requirements. The T4-CA and T5-CA temper
Ετικέτα από κασσίτερο ETP 0,19 mm 0,20 mm σε πάχος
ETP Tinplate Sheet 0.19mm 0.20mm In Thickness Tin Metal Sheets For Containers Product Overview ETP Tinplate sheet 0.19mm, 0.20mm in thickness Tin Metal Sheets for containers Tinplate is a thin steel sheet coated by tin. It has an extremely beautiful metallic luster as well as excellent properties in corrosion resistance, solderability, and weldability. Tinplate is used for making all types of containers such as food cans, beverage cans, 18-liter cans, and artistic cans. Its
Ηλεκτρολυτική τσιμένια πλάκα τροφίμων με ανώτερη αντοχή στη σκουριά και τις αλκαλίες Πολλαπλό πάχος
Food Grade Electrolytic Tin Plate With Superior Rust Alkali Resistance Multiple Thickness Product Overview Food Grade Electrolytic Tin Plate with Superior Rust & Alkali Resistance - Multiple Thickness Features of Tin Plate Beautiful Appearance: Characterized by its beautiful metallic luster with various surface roughness options Excellent Paintability & Printability: Beautiful printing finishes using various lacquers and inks Excellent Formability & Strength: Appropriate
Παρακαλούμε χρησιμοποιήστε την ηλεκτρονική φόρμα επικοινωνίας παρακάτω αν έχετε οποιεσδήποτε ερωτήσεις, η ομάδα μας θα επικοινωνήσει μαζί σας το συντομότερο δυνατό.
